Braun Pro Wet&Dry 9470cc User Manual (English)

Questions and Answers:

R
Rebecca PhelpsSep 1, 2025
Why does my Braun Pro Wet&Dry 9470cc Electric Shaver head have an unpleasant smell?
- B
  Benjamin BlankenshipSep 1, 2025
  An unpleasant smell from your Braun Electric Shaver head can occur due to: * Cleaning the shaver head with water. When cleaning with water, use only hot water and, occasionally, a bit of liquid soap (without abrasive substances). Remove the Foil & Cutter cassette to allow it to dry thoroughly. * Using the cleaning cartridge for too long. Change the cleaning cartridge at least every 8 weeks.
U
uadamsSep 1, 2025
What to do if Braun Pro Wet&Dry 9470cc head is damp?
- D
  Dana PadillaSep 1, 2025
  If the shaver head of your Braun Electric Shaver is damp after cleaning: * The drying time after automatic cleaning may have been too short. Wait until the drying process is completed. * The drain of the Clean & Charge station might be clogged. Clean the drain with a wooden toothpick.
S
Stacy BassSep 2, 2025
Why my Braun Electric Shaver does not charge completely and keeps blinking?
- C
  Cynthia PruittSep 2, 2025
  If your Braun Electric Shaver does not charge completely and keeps blinking, the ambient temperature is likely outside the recommended range. The recommended ambient temperature for charging is 5 °C to 35 °C.
M
michael52Sep 2, 2025
How to get rid of the unpleasant smell from my Braun Pro Wet&Dry 9470cc Electric Shaver head?
- B
  byrdalexSep 3, 2025
  An unpleasant smell from your Braun Electric Shaver head is likely due to cleaning it with water alone. When cleaning the shaver head with water, use hot water and, occasionally, a bit of liquid soap (without abrasive substances). Remember to remove the Foil & Cutter cassette and allow it to dry completely.
S
Samuel WelchSep 3, 2025
What to do if my Braun Pro Wet&Dry 9470cc charging does not start?
- C
  cheryl85Sep 3, 2025
  If charging doesn't start when your Braun Electric Shaver is connected to a power socket or placed in the Clean & Charge Station, wait a few minutes, as charging may be delayed, especially after long storage. Charging should start automatically. Ensure that the ambient temperature is within the recommended range of 5 °C to 35 °C. Verify that the power supply is correctly plugged into the shaver, ensuring it snaps in properly. If using the Clean & Charge Station, confirm that the shaver is placed correctly, with the contacts aligned.