Braun Pro Wet&Dry 9470cc

Questions and Answers:

H
Howard MorganSep 23, 2025
Why does my Braun Rechargeable shaver smell bad?
- P
  pattersondavidSep 23, 2025
  An unpleasant smell from your Braun Rechargeable shaver head may be due to: * Cleaning the shaver head with water incorrectly. * Using the cleaning cartridge for too long. To address this: * When cleaning the shaver head with water, use only hot water and, occasionally, some liquid soap (without abrasive substances). Remove the Foil & Cutter cassette and let it dry. * Change the cleaning cartridge at least every 8 weeks.
H
hlopezAug 31, 2025
How to fix a Braun Electric Shaver that does not start?
- S
  Sheryl JohnsonAug 31, 2025
  If your Braun Electric Shaver is not starting when you press the on/off button, unplug the shaver. Also, try pressing and holding the on/off button for 5 seconds to unlock the shaver.
M
moorenancyAug 25, 2025
Why is my Braun Pro Wet&Dry 9470cc shaving performance dropped significantly?
- K
  Kevin BatesAug 25, 2025
  If the shaving performance of your Braun Electric Shaver has significantly declined: * The foil and cutter may be worn. If so, renew the Foil & Cutter cassette. * The shaving system could be clogged. To resolve this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it thoroughly, tap it out, and once dry, apply a drop of light machine oil to the foil.
O
operkinsAug 25, 2025
What to do if cleaning does not start on Braun Pro Wet&Dry 9470cc?
- M
  mholtAug 26, 2025
  If cleaning doesn't start when you press the start button on your Braun Electric Shaver, check the following: * Ensure the shaver is properly placed in the Clean & Charge Station, pushed to the rear so that the contacts align. * Verify the cleaning cartridge contains sufficient cleaning fluid. If the display blinks red, insert a new cleaning cartridge and press the start button again. * The appliance might be in stand-by mode. Press the start button again to initiate cleaning.
V
Vernon BakerAug 26, 2025
Why does my Braun Pro Wet&Dry 9470cc Electric Shaver battery performance dropped significantly?
- R
  Rachel JosephAug 26, 2025
  If you notice a significant drop in battery performance of your Braun Electric Shaver, there are a couple of potential reasons: * The foil and cutter may be worn, requiring more power for each shave. Renew the Foil & Cutter cassette. * If you regularly clean the shaver head with water but don't lubricate it, apply a drop of light machine oil on top of the foil once a week for lubrication.
E
Eric HickmanAug 26, 2025
What to do if my Braun Electric Shaver does not start?
- A
  Andrew WellsAug 26, 2025
  If your Braun Electric Shaver does not start when you press the on/off button, it might be for one of two reasons: first, the shaver can only be operated cordless, and second, the travel lock might be activated. To solve this, unplug the shaver and press the on/off button for 5 seconds to unlock the shaver.
M
Melanie ShieldsAug 27, 2025
What to do if my Braun Pro Wet&Dry 9470cc Electric Shaver is not charging?
- D
  David ParkerAug 27, 2025
  If your Braun Electric Shaver isn't charging when connected to a power socket, it might be due to a few reasons: sometimes charging is delayed, especially after long storage; the ambient temperature might be outside the valid range; or the power supply isn't properly plugged in. Wait a few minutes to see if charging starts automatically. Ensure the ambient temperature is between 5 °C and 35 °C. Make sure the power supply snaps in correctly.
R
rosalesanneAug 27, 2025
Why is my Braun Pro Wet&Dry 9470cc Electric Shaver battery performance dropped significantly?
- J
  Joe WoodsAug 27, 2025
  A significant drop in battery performance of your Braun Electric Shaver can occur if the foil and cutter are worn, requiring more power for each shave. Renewing the Foil & Cutter cassette can resolve this issue. Also, regularly cleaning the shaver head with water but not lubricating it can cause this problem. If you clean the shaver with water, apply a drop of light machine oil on top of the foil once a week for lubrication.
A
Autumn LeAug 27, 2025
Why my Braun Pro Wet&Dry 9470cc Electric Shaver does not start when pressing the on / off button?
- M
  Mr. James KingAug 27, 2025
  The Braun Electric Shaver can only be operated cordless. If your shaver doesn't start when pressing the on/off button, the travel lock might be activated. Unplug the shaver and press the on/off button for 5 seconds to unlock it.
S
Sarah BenderAug 28, 2025
Why is my Braun Electric Shaver blinking and not charging fully?
- A
  anthonycarrollAug 28, 2025
  If your Braun Electric Shaver doesn't charge completely and keeps blinking, the ambient temperature may be outside the valid range. The recommended ambient temperature for charging is 5 °C to 35 °C.