Brauniger IQ-ONE - Switching the Instrument ON;OFF; Switching Off

4 Operating Instructions IQ-ONE / IQ-ONE+
Bräuniger GmbH
Switching the Instrument ON/OFF
The date and time are displayed when the
instrument is off. To turn it on, press and hold the
TIME/CHRONO/MEMO Key until you hear a beep,
and then release it. After a short display test you
will see the Start up Screen.
The Startup Screen shows the serial
number, the battery condition and the
date. The analog scale on the left shows
the battery charge.
Switching Off
To switch the instrument OFF without setting the
time, Press and hold the TIME/CHRONO/MEMO Key
for about seven seconds.
During the shutdown process, the Set Menu for
time will appear – unless a barogram was recorded
for the current flight [Model 6010 only]. Continue to
hold the key down while the instrument counts
down from 3 to 1. You will hear a beep and see
OFF appear on the display when the process is
complete.
Battery condition
5= full
0= empty
Internal Serial
number
Day, month
and year
Time
Date