Braven 105 - Turn On & Bluetooth Auto-Pairing; Powering On and Pairing Mode; Connecting to a Device; Passcode Entry and Auto-Off

3
ENG
ENGLISH
TURN ON & BLUETOOTH
®
AUTO-PAIRING
1. Long press on “O” button powers on 105
and automatically begins pairing mode.
LED behind grill will blink rapidly.
2. Activate Bluetooth
®
on the phone or
device you are pairing with (see your
device’s instruction manual for information
on activating its Bluetooth
®
settings).
3. Go to your phone or device’s Bluetooth
®
settings and select “BRAVEN 105” from
the list.
4. If asked for a passcode, enter “0000”
5. You will hear a single beep when
BRAVEN 105 is paired with your device.
NOTE: Braven 105 only remembers 1
device.
NOTE: If your BRAVEN does not have
an active Bluetooth
®
connection and
is left on, it will shut itself off after 30
minutes. To restart your BRAVEN you
will need to press and hold the power
button for 2-3 seconds.