Braven 105 - New Device Pairing and Speakerphone; Re-pairing the Speaker; Speakerphone Operation

4
Full manual and troubleshooting: braven.com/manuals
ENGLISH
NEW DEVICE PAIRING
SPEAKERPHONE
1. If you’d like to pair BRAVEN 105 to a new
device, long press “O” to turn off speaker.
Once speaker is off, long press “O” until
you hear the speaker power on and hear
the pairing sound.
2. Activate Bluetooth
®
on the phone or
device you are pairing with (see your
device’s instruction manual for information
on activating its Bluetooth
®
settings).
NOTE: Speaker can ONLY go into paring mode
or be put into pairing mode when the speaker is
rst turned on.
• Press the “O” button to answer a call
over the speaker. Press the “O” button
again to end the call.
3. Go to your phone or device’s Bluetooth
®
settings and select “BRAVEN 105” from
the list.
4. If asked for a passcode, enter “0000”
5. You will hear a single beep when
BRAVEN 105 is paired with you device.