Braven 805 - Turn On & Bluetooth Pairing; Bluetooth Pairing Process

2
ENG
TURN ON & BLUETOOTH
®
PAIRING
1. Press the Power button for 2-3
seconds to turn on your BRAVEN.
Press the same button again for
2-3 seconds to turn your BRAVEN
off.
2. Activate Bluetooth® on the phone
or device to which you are pairing
(see your device’s instruction
manual for information on
activating its Bluetooth
®
settings).
3. Press and hold the Play button on
your BRAVEN until you hear the
BRAVEN pairing sound.
4. Go to your phone or device’s
Bluetooth
®
settings and select
“BRAVEN 805,” “BRAVEN 1100”
or “BRAVEN BRV-HD” from the
list.
5. If asked for a passcode enter “0000.”
Your BRAVEN will remember the last 8 devices it has
paired with.
NOTE: If your BRAVEN does not have an active
Bluetooth
®
connection and is left on, it will
ZO\[P[ZLSMVɈHM[LY TPU\[LZ;VYLZ[HY[`V\Y
BRAVEN you will need to press and hold the
WV^LYI\[[VUMVYZLJVUKZ