Braven BRV-PRO - Turn on & Bluetooth Pairing

4
5
Full manual and troubleshooting: braven.com/manuals
ENG
CHARGING YOUR
BRAVEN
• Before using your BRAVEN
for the first time, charge the
unit until all 5 Battery indicator
lights are solid (not flashing),
indicating a full charge
(typically 2 to 3 hours).
• To charge your BRAVEN, plug
the included USB-to-Micro-
USB cable into a wall power
adapter (not included) or into
a powered USB port on a
computer. Plug the Micro-USB
connector end of the cable
into the BRAVEN charging
port.
Your BRAVEN is designed to charge USB
devices that draw from 0.3A - 1A (most
cell phones & mp3 players – tablets and
other 2A devices cannot be charged
by your BRV-PRO) using the full-sized
USB port located behind the cap. To use
external charging:
1. Turn your BRAVEN on.
2. Plug the USB power cable that
came with your phone, mp3 player,
or other mobile device into the USB
port on your BRAVEN.
3. Plug the other end of the cable
into your mobile device, and it will
immediately begin charging.
CHARGING EXTERNAL
DEVICES SPEAKERPHONE
• Press the Answer-End button
on your BRAVEN to answer the
call over the speaker. Press the
Answer-End button again to end
the call.
• The BRV-PRO is IPX7 Waterproof,
and is designed to withstand rainfall,
water jets, and water splashing.
• IMPORTANT - To ensure your
BRAVEN BRV-PRO speaker
is prepared for use in a wet
environment, remove all cable
connections and tightly close the
rear water cap. If the water cap is not
properly closed, the BRV-PRO will
not be water resistant.
WATERPROOF
FEATURES