Braven Stryde - Power and Bluetooth Pairing; Powering On and Off; Bluetooth Device Pairing; Automatic Power Management

ENGLISH | 3
POWER AND BLUETOOTH
®
PAIRING
VOLUME AND PLAYBACK CONTROL
1. Press the Power button for 2-3 seconds to turn your BRAVEN STRYDE
™
on / off.
2. Activate Bluetooth
®
in the settings of your mobile device (check the
user manual of your device for further instruction).
3. Press and hold the Bluetooth pairing button for 2-3 seconds until the audio cue signals.
4. Select BRAVEN STRYDE in your device’s Bluetooth settings to establish the connection.
5. Cancel Bluetooth pairing mode by pressing the Bluetooth button until the audio cue signals.
Your BRAVEN STRYDE remembers the last eight devices it paired with. Tap BRAVEN STRYDE in your Bluetooth
device menu to re-connect.
NOTE: If your BRAVEN is powered on with an inactive Bluetooth connection for 30 minutes, it will automatically
power off. Turn your BRAVEN on again by holding the power button for 2-3 seconds until you hear the audio cue.
Increase volume by short pressing the “+” button or decrease volume by pressing the “–” button. An audio cue will
indicate when you’ve reached max volume.
Skip to the next track by long pressing the “+” button or play the previous track by long pressing the “–” button.