BRAYER BR1085 - Page 9

9
EN
- to exit standby mode, press the On/O󰀨 Power Button
(14) «
»; to begin boiling again, press the « » button
(14).
HEATING THE WATER UP TO PRESET
TEMPERATURE
• You can heat water to the desired temperature (40-50-
60-70-80-90-100°C). Di󰀨erent tea types have di󰀨erent
recommended water temperatures.
• Recommended water temperature: 40-50°C – for baby
food and other purposes, 60-70°C – for white and
green tea, 80°C – instant co󰀨ee, 90-100°C – black tea.
• In standby mode, press the «
» button (13) to set the
desired water heating temperature at 40-50-60-70-80-
90-100°C; the Digital Indication (11) will show target
temperature of water inside the Kettle Jug (2), press
the On/O󰀨 Power Button (14) «
», after that the Digital
Indication (11) will show the actual temperature of
water in the Kettle Jug (2), and the Illumination (1) will
activate.
• The color of the Kettle Jug (2) Illumination (1) for
di󰀨erent water heating temperature settings:
- water heating temperature at 40°C will display bright
white-blue illumination;
- water heating temperature between 40 and 49°C will
display bright green illumination;
- water heating temperature between 50 and 59°C will
display light blue illumination;
- water heating temperature between 60 and 69°C will
display blue illumination;
- water heating temperature between 70 and 79°C will
display purple illumination;
- water heating temperature between 80 and 89°C will
display yellow illumination;
- water heating temperature between 90 and100°C will
display red illumination;
• Once the desired temperature is reached, you will hear
a sound signal, and the heating element of the Kettle
will turn o󰀨.
• Press the On/O󰀨 Power Button (14) «
» should you
need to turn o󰀨 the kettle during water boiling.
WATER TEMPERATURE MAINTENANCE MODE
Notes:
- this function maintains the set water temperature for
2 hours. After this time, the temperature maintenance
mode will automatically turn o󰀨;
- the temperature maintenance mode operates
intermittently. If the water temperature inside the
Kettle Jug (2) drops by 5 degrees, the boiling mode
will activate. After boiling, the water will cool down to
the set temperature;
- the water temperature maintenance mode at 100°C is
inactive and is solely used for boiling water.
• By pressing the «
» button (13), set the desired water
temperature maintenance to 40-50-60-70-80-90-100°C,
the Digital Indication (11) will show ashing target
temperature, press the On/O󰀨 Power Button (14) «
», after which, the Digital Indication (11) will show the