BRAYER BR2400 - Page 10

10
EN
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord into the power outlet.
• By pressing the «
» button (12) choose the
«Yogurt» cooking program, and the «Yogurt» symbol
(29) will be ashing on the display.
• The default pressure holding time is 8 hours, you can
change the pressure holding time by pressing the «
» buttons (14), the pressure holding time should
be tailored to your needs.
• In 5 seconds, the multicooker will turn on in the «Yogurt»
cooking program.
• You can add jam, honey or canned fruit to the nished
yogurt.
Note: setting the time for delay of cooking is not available in
the «Yogurt» program.
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Yogurt».
«Stew» program
• Use the «Stew» program for cooking stewed meat.
• Place the meat into the bowl (6), add spices and the
required quantity of water.
• Place the lid (5) in the initial place of installation, turn the
lid (5) counterclockwise until bumping.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord (22) into the power outlet.
• By pressing the «
» button (12) choose the
«Jam» cooking program, and the «Jam» symbol will be
ashing on the display
• The default pressure holding time is 8 hours, you can
change the pressure holding time by pressing the «
» buttons (14), the pressure holding time should
be tailored to your needs.
• In 5 seconds, the multicooker will turn on in the «Jam»
cooking program.
• Note:
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Jam».
«Yogurt» program
• Program for preparing yogurt.
• Before preparing yogurt, pour hot boiled water into the
bowl (6) for elimination of bacteria, after 2 minutes drain
the water and wipe the bowl (6).
• Pour fresh milk into the bowl (6), add yogurt
fermentation starter or one package of yogurt. Stir the
mixture thoroughly with the sterilized spoon, in order
to avoid damage of the non-stick coating, do not use
metal objects to stir the food.
• Install the bowl (6) into the multicooker.
• Place the lid (5) in the initial place of installation, turn
the lid (5) counterclockwise until bumping.