BRAYER BR2400 - Page 11

11
EN
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord into the power outlet.
• By pressing the «
» button (12) choose the
«Stew» program, and the «Stew» symbol will be
ashing on the display.
• The default pressure holding time is 15 minutes, you
can change the pressure holding time by pressing the
«
» buttons (14).
• In 5 seconds, the multicooker will turn on in the «Stew»
cooking program.
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Stew».
«Soup» program
• The «Soup» program is intended for the preparation of
various broths or soups.
• Prepare the required food and put it into the bowl
(6), add the necessary quantity of water following the
recommendations in the section «RULES FOR USING
THE COOKING BOWL».
• Place the lid (5) in the initial place of installation, turn
the lid (5) counterclockwise until bumping.
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the
multicooker body (9).
• Plug the power cord into the power outlet.
• By pressing the «
» button (12) choose the
«Soup» cooking program, and the «Soup» symbol
will light up and will be ashing on the display.
• The default operation time is 25 minutes, you can
change the pressure holding time by pressing the «
» buttons (14), the longer the pressure holding
time is, the softer the cooked food will be.
• In 5 seconds, the multicooker will turn on in the
«Soup» cooking program.
• The multicooker regulates the pressure and
maintains the temperature of the liquid, so the liquid
does not go into a strong boil. For example, when
cooking chicken broth, it will be transparent, if you
need to chop the cooked food, use a separate dish
and add the chopped food just before serving.
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Soup».
«Steam» cooking program
• Use the «Steam» program to cook vegetables,
seafood or to heat up food.
• Install the grid into the bowl (6) and put food on it.
• Pour some water into the bowl (6), at least two
measuring cups, required for intensive steam
generation.
• Place the lid (5) in the initial place of installation, turn
the lid (5) counterclockwise until bumping.