BRAYER BR2400 - Page 12

12
EN
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord (22) into the power outlet.
• By pressing the «
» button (12) choose the
«Steam» program, and the «Steam» symbol will be
ashing on the display.
• When the «Steam» program is chosen, the multicooker
will turn on in 5 seconds.
• The default operation time of the «Steam» program is
10 minutes.
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Steam».
«Meat» program
• The «Meat» cooking program is used for cooking meat
or stewed meat.
• Place the meat into the bowl (6), add spices and the
required quantity of water.
• Place the lid (5) in the initial place of installation, turn
the lid (5) counterclockwise until bumping.
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord (22) into the power outlet.
• By pressing the «
» button (12) choose the «Meat»
cooking program, and the «Meat» symbol will be ashing
on the display.
• The default pressure holding time is 15 minutes, you can
change the pressure holding time by pressing the
«
» buttons (14).
• In 5 seconds, the multicooker will turn on in the «Meat»
cooking program.
• Press the «Keep warm/Cancel» button to turn o󰀨 the
program «Meat».
«Porridge» program
• Rinse the rice and put it into the bowl (6), the minimum
amount of rice should be at least 1 measuring cup.
• Depending on your needs, add milk from 1 to 1.5
measuring cups. Add other food as you prefer: sugar,
salt, baking soda, etc.
• Place the lid (5) in the initial place of installation, turn the
lid (5) counterclockwise until bumping.
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord (22) into the power outlet.
• By pressing the «
» button (12) choose the
«Porridge» cooking program, and the «Porridge» symbol
(29) will light up and will be ashing on the display.
• The heating time depends on the amount of rice, the