12
- plug the microwave oven into another socket so that the
oven, the radio set and the TV-set are connected to the
dierent mains circuits.
ASSEMBLING THE MICROWAVE OVEN
Installing the glass tray
• Open the oven door (2).
• Set the roller support (4) of the glass tray (7) in the
groove located in the process chamber bottom.
• Install the roller support (3)
• Carefully set the glass tray (7) on the roller support (4).
• Do not set the glass tray (7) with its bottom side up.
Notes:
- do not prevent rotation of the glass tray (7) during
the oven operation. During operation of the microwave
oven the glass tray (7) can rotate clockwise or
counterclockwise.
- it is necessary to set food and cookware for food cooking
only on glass tray (7).
- in the event of cracks or shears on the glass tray (5),
replace it immediately.
USING THE MICROWAVE OVEN
ATTENTION!
- Every pressing of the active button is accompanied by a
sound signal.
- The current time, the remaining cooking time, the preset
power and the operation mode icons are shown on the
display (10).
- After the end of operation you will hear sound signals.
The sound signals will repeat every 2 minutes until you
open the microwave oven door or press any button on the
control panel (5).
- After 1 minute in the standby mode the display (10)
brightness will decrease. If you touch the buttons on the
panel (5) or open the door (2), the display (10) brightness
will intensify.
CURRENT TIME SETTING
You can set the current time in the 12-hour or 24-hour time
format.
Example:
To set the current time 8:30 in the 12-hour or 24-hour time
format.
1. Insert the power plug into the mains socket.
2. Press the button (13) «Clock» once or twice to select the
12-hour or 24-hour time format.
3. Turn the knob (17) «Time/Menu» and set the current
time «hours» 8:00.
4. To conrm, press the button (13) «Clock» once.
5. Turn the knob (17) «Time/Menu» and set the current
time «minutes» 8:30.
6. To conrm, press the button (13) «Clock».
To Next Page
Loading...