EasyManua.ls Logo

BRAYER BR2503 - Storage; Delivery Set; Technical Specifications

Default Icon
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
EN
Before cleaning the microwave oven, switch it o󰀨 and
unplug it.
Keep the control panel away from humidity, clean it with
a soft, slightly damp cloth, then wipe it dry.
Keep the microwave oven process chamber clean.
If food pieces or leaks remained on the oven walls,
remove them with a damp cloth.
If the process chamber is very dirty, you may use a mild
detergent.
Do not use abrasive detergents for cleaning outer and
inner surfaces of the oven.
Make sure that no water or detergent gets into
openings on the body lid, intended for outlet of air and
steam.
Keep the oven door clean, regularly clean the oven
door from two sides.
Do not allow accumulation of crumbs and food pieces
between the door and the front panel, it may prevent
the oven door from normal closing.
Keep the grill heating element clean, periodically clean
it (only in the cold state) with a slightly damp cloth and
wipe dry.
Regularly take out and clean the glass tray and its roller
support; wipe the bottom of the process chamber.
Wash the glass tray and the roller support in warm
water with a neutral detergent, then rinse and dry.
The roller support and the glass tray may be washed in
a dishwasher.
Do not immerse the heated glass tray into cold water:
the glass tray may crack due to extreme temperature
di󰀨erence.
To remove foreign smells in the oven process chamber,
mix juice and peel of one lemon in a cup of water, pour
into a microwave-safe soup plate or container and place
on the tray, switch the oven on at the medium power and
set the operation time from 5 to 8 minutes.
Open the door and clean the oven process chamber
thoroughly.
STORAGE
Before taking the microwave oven away for long-term
storage, clean the process chamber and the outer
surface of the body of the oven.
Keep the microwave oven in a dry cool place out of
reach of children and disabled persons.
DELIVERY SET
1. Microwave oven – 1 pc.
2. Roller support – 1 pc.
3. Glass tray roller support – 1 pc.
4. Glass tray – 1 pc.
5. Metal grid – 1 pc.
6. Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
The microwave oven is placed in class B, group 2.
The group 2 equipment: group 2 includes all the ISM
radio-frequency equipment, where radio-frequency