EasyManua.ls Logo

BRAYER BR2503 - Recycling

Default Icon
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
EN
energy in the frequency range from 9 kHz to 400
GHz is only deliberately generated and used locally,
in the form of electromagnetic emission, inductive
and/or capacity coupling, for material processing,
for the purposes of control/analysis or for transfer of
electromagnetic energy.
The class B equipment is the equipment, suitable
for residential use and for use in institutions directly
connected to the low-voltage mains, which supply
buildings used for purposes related to human life.
Operation conditions:
Air temperature: from +10° C to +35°C
Relative air humidity : 35- 80%
Air pressure: 86-106 kPa (650 – 800 mm Hg).
Main specications
Power supply: 220-240 V, ~ 50 Hz
Rated input power in the microwave mode: 1400 W
Rated input power of the grill: 1000 W
Rated output microwave power: 900 W
Operation frequency: 2450 ± 49 MHz
Capacity of the process chamber: 23 l
Diameter of the glass tray: 270 mm
Dimensions: 281×483×387 mm
Net weight: 14,1 kg
RECYCLING
To prevent possible damage to the
environment or harm to the health of
people by uncontrolled waste disposal,
after expiration of the service life of the
unit or the batteries (if included), do not
discard them with usual household waste,
take the unit and the batteries to specialized stations for
further recycling.
The waste generated during the disposal of products
is subject to mandatory collection and consequent
disposal in the prescribed manner.
For further information about recycling of this product
apply to a local municipal administration, a household
waste disposal service or to the shop where you
purchased this product.
The manufacturer reserves the right to change the
design, structure and specications not a󰀨ecting
general operation principles of the unit, without prior
notice.
The unit operating life is 3 years
The manufacturing date is specied in the serial
number.
In case of any malfunctions, it is necessary to apply
promptly to the authorized service center.