12
Table of contents Page
1. Product description 12
1.1 Application and use 12
1.2 Indications 12
1.3 Contraindications 12
1.4 Technical data 12
1.5 Product variants and designs 13
2. Risks and safety information 14
2.1 Warning 14
2.2 Caution 14
3. Storage and transportation guidelines 15
4. Waste disposal 15
5. Start-up 15
5.1 Assembly 15
5.2 Lists of device functions and components 16
5.3 Preparatory work 17
5.4 Mixing cups 17
5.5 Filling level of the mixing cups 18
6. Cleaning and maintenance 18
6.1 Cleaning 18
6.2 Maintenance 18
7. Troubleshooting 18
8. Declaration of conformity 19
9. Warranty 19
10. Symbols used 19
11. Other information 19
1. Product description
1.1 Application and use
Thanks to the matched system components and the sophisticated technology, the ecovac mixing system
ensures consistent results when processing investment materials, plasters and silicones. Consistent results
are achieved by the special geometry of the mixing spiral in combinatiion with the mixing cup and the unit
functions that can be adjusted individually. In the standard version, the device is suitable for wall mounting.
The switches and panels are clearly arranged to enable user-friendliness. Two setting parameters for a specific
vacuum allow perfect use of the materials to be mixed. The high-performance and maintenance-free pump
generates the selected vacuum very quickly. The mixing cup is drawn in and held automatically at the device.
The device is efficient due to the fact that it can be operated using six different mixing speeds.
1.2 Indications
Homogeneous, bubble-free mixing of dental plasters, investment materials and silicones under vacuum.
Please observe the information regarding rpm, mixing times and vacuum settings of the material manufactu-
rer and use a separate mixing cup for each material - to avoid obtaining incorrect mixing results!
1.3 Contraindications
Based on the current state of knowledge there are no known contraindications.
1.4 Technical data
Dimensions in mm [D/W/H]: 250 x 200 x 290 (wall mounting)
250 x 250 x 650 or 590 (incl. stand)
Weight [kg]: 13 (wall mounting)
25 (incl. stand)
Speed [rpm]: 250 / 320 / 390 / 460 / 530 / 600
U [VAC]: 200 - 240 (Input)
bredent GmbH & Co.KG · Weissenhorner Str. 2 · 89250 Senden · Germany · Tel. +49 7309 872-22 · Fax +49 7309 872-24
www.bredent.com · e-mail info@bredent.com
To Next Page
Loading...