4
2
3
USE WITH ANCHORPOINT
1
POSITION
ANCHORPOINT
Position the Anchorpoint next
to where you will be cooking and
ensure the horizontal stabilizing
bars are perpendicular to the
fire area.
SECURE
ANCHORPOINT
Insert the top end of the Rod
(opposite to the pegs and collar)
into the Anchorpoint opening.
Using an up-and-down motion,
pound the Anchorpoint system
into the ground using the Rod
until the entire spearpoint and
stabilizing bars of the Anchorpoint
are in the ground. Be sure to keep
the Anchorpoint and Rod vertical
for maximum stability.
DO NOT use the end of the Rod with
the pegs or pound the Rod with a
hammer or axe—those methods can
damage the Rod.
ADD OUTPOST
ROD & GRATE
Use the notch openings on the
Anchorpoint to secure the Rod
in place. Follow steps 1-3 on the
previous page to attach the Rod
and Grate to the Anchorpoint.
To Next Page
Loading...
