Breezair IWC 10 - User Manual

Installation&OperationManual
®
IndustrialW allControl-IWC10
(incorporatingSmartHubandF aultIndicatingfeatures)

Summary

Safety

Kit Components

Lists the parts included in the industrial wall control kit for installation and operation.

Remote Sensor Location

Installing the Wall Control

Terminals Legend

Getting Started

At Power Up

Describes the Wall Control's initial display responses based on connected components upon first power application.

Changing Speed Table for ICON Coolers

Procedure to select the correct speed table for ICON coolers for optimal performance.

Drying Time Enable

Enabling or disabling the Pad Drying Cycle via parameter B6 for improved cooler pad longevity.

Setting the Clock

Turning the Cooler On

Preparing to Start

Manual Mode

Auto Mode

Programming Wall Control

Programming the Wall Control

General instructions for accessing the programming mode and selecting program types.

24 Hour Clock Program

Procedure for programming the 24-hour clock on the Wall Control unit.

Temperature Control Program

Setting the desired room temperature and scale (°C or °F) for automatic cooler operation.

Humidity Control Program

Explanation of Humidity Control modes and how to change between them using parameter B4.

Humidity Set Point

7-Day Timer Program

Drain Signal Delay Program

External Control

Safety Off

Remote On;Off

Low Battery Warning

Service Mode - Single Cooler Installation

Service Mode - Multiple Cooler Installation

Drain Mode

Power Failures

Exploded View of the Wall Control

Breezair Control System Cable Lengths

Breezair IWC 10 Specifications

General

Voltage	24 VAC
Operating Temperature	0°C to 50°C
Protection Rating	IP20
Compatibility	Breezair evaporative coolers
Type	Wall Mounted Controller
Features	Programmable timer, fan speed control
Humidity Range	5% to 95% non-condensing