13
CHAPTER 2 - ADJUSTMENT & OPERATING INSTRUCTIONS
(Reference numbers refer to the figures at the bottom of the page)
Adjusting the
Handlebars (1)
Adjust height/ distance of handlebars as follows:
• Release the Handlebars Adjusting Lever
(1.5), which secures the handlebars in
place, by pulling the Knob outward.
• Release the Knob and insure handlebar
lock.
Seating into the
Breeze
Before driving the Breeze make sure that the
Charging Plug is disconnected from the Charging
Socket (1.4).
Note:
While the Charging Plug is inserted in
the Charging Socket, the Breeze cannot be
operated.
Lift the Lever (3.2) upward, rotate the Seat and
raise the Armrest (3.4) to give you easy access to
the Seat.
Adjust the seat Forward Reverse using
the Lever (3.1)
To Next Page
Loading...