Breeze 4 Wheels - User Manual

Questions and Answers

J
Jennifer KochAug 18, 2025
What to do if my Breeze 4 Wheels won't move when squeezing the operating lever?
- I
  ipeckAug 18, 2025
  If your Breeze Scooter doesn't move when you squeeze the operating lever, there are several possible reasons. First, ensure that the main key switch is in the 'ON' position. Next, check if the charging plug is disconnected from the charging socket. Also, verify that the mechanical release lever of the electromagnetic brake is not operated and is in the engaged position. If none of these solutions work, it may indicate a control system failure, and you should call for technical support.
G
Gregory AndersonAug 20, 2025
What to do if my Breeze Scooter has a flat tire and unstable driving?
- M
  Maria MurrayAug 20, 2025
  If you experience a flat tire and unstable driving with your Breeze Scooter, it could be due to low air pressure. In this case, pump the tire to the normal pressure. Alternatively, the tire may have a puncture, requiring you to repair it.
T
Timothy SteinAug 23, 2025
Why does my Breeze 4 Wheels Scooter key switch not turn on the light?
- T
  Tamara CaseyAug 23, 2025
  If the key switch is turned to the 'ON' position, but the 'ON' light does not illuminate on your Breeze Scooter, it's likely due to a popped main fuse or an electrical fault. Try resetting the fuse. Note: Do not reset the fuse more than twice. If the symptom recurs after resetting the second time, call the authorized dealer for further technical support.
W
wtaylorAug 26, 2025
What to do if the display flashes and the Breeze Scooter does not move?
- J
  Julie GarciaAug 26, 2025
  If the display on your Breeze Scooter flashes and the vehicle doesn't move, it indicates a controller coded fault. In this case, you should ask for technical assistance.
D
David GonzalezAug 28, 2025
What to do if my Breeze Scooter has intermittent drive?
- H
  hoffmanvictoriaAug 28, 2025
  If your Breeze Scooter experiences intermittent drive, there are several potential causes. One possibility is low battery capacity, so charge the batteries for at least 18 hours. Another cause could be failed connections; remove the gray cover and check the battery cable connections, cleaning any corrosion on the terminals with a damp cloth. Finally, a faulty battery could be the issue; if the red LEDs are still on after recharging, contact your dealer for a battery replacement.
C
Connie BrooksAug 30, 2025
What to do if the warning led start flashes while driving Breeze 4 Wheels Scooter?
- J
  jeffreycervantesAug 30, 2025
  If the WARNING led starts flashing while driving your Breeze Scooter, it means the motor temperature is too high. You should stop the scooter and allow the motor to cool down for a while.
M
Melanie RiceSep 2, 2025
Why does my Breeze Scooter not stop when brake lever is fully pressed?
- E
  Eric HerreraSep 2, 2025
  If the manual mechanical brake lever is fully pressed but the Breeze Scooter does not stop, it is likely due to a loose hand brake mechanism. Try tightening the brake cable.
C
Collin JohnsonSep 4, 2025
What to do if my Breeze Scooter speed decreases gradually when driving uphill?
- A
  Adam PruittSep 4, 2025
  If the speed of your Breeze Scooter decreases gradually when driving uphill or carrying heavy loads, it suggests that the controller's temperature is too high. It's recommended to stop the scooter and allow the controller to cool down for a while.
J
Janice PalmerSep 6, 2025
Why does my Breeze 4 Wheels Scooter not stop at a regular distance?
- J
  jacquelinehayesSep 7, 2025
  If, when releasing the speed lever on a level surface, your Breeze Scooter does not stop at a regular distance (or more than 3 meters), it indicates a not adjusted or faulty controller. Ask for technical assistance.
M
Mark StoneSep 9, 2025
What to do if the inhibit LED is lit on my Breeze Scooter?
- B
  browndeniseSep 9, 2025
  If the inhibit LED is lit on your Breeze Scooter, it means the vehicle is charging. Remove the charging plug from the charging socket.