20
Pre-use Now after learning through all the operating
instructions, before starting to use the Breeze, do a
visual check through the all the parts of the vehicle,
to make sure that no external damage has been
occur to the vehicle while transportation. In any
case you are not sure call your dealer and ask for
an explanation.
Controller
Programming
Several parameters of the Breeze Controller can be
programmed with a special Programmer.
Programming should be done by trained authorized
technician only. Wrong programming can cause
abnormal operation of the Breeze ,Harm persons
and Injury.
Performance
check
It is very much recommended that when receiving
as new or from another user or after a period of not
using the Breeze a performance check will be made
as follows:
1. Switch on the main switch.
2. See that on the display panel – the battery
indicator is lit and the Ready/ON led is lit as well.
3. Squeeze the speed lever slowly and make sure
that the Breeze is traveling with correspondence
to the squeezing on the lever.
4. Release the lever and make sure that the Breeze
is stopping softly and that you hear a click coming
from the EMB engaging.
5. Make a check of all the buttons functions on the
handlebar.
6. Switch off the main key switch. Your Breeze is
now ready to drive.
To Next Page
Loading...