21
Pre-use
measures
The user should know his weight and all other loads
is lower than the maximum of 160 Kg (352lbs).
If not sure it should be measured.
Safety Belt
Assembling
(option)
If a safety belt is needed.
Secure a standard car Safety belt to the seat
armrest securing bolts (See 3.5 on Figure 6 ).
Attaching the
Breeze in motor
vehicle for
transportation
To transport the Breeze in a motor vehicle , the
Breeze has to be secured while traveling .
The Foot rest of the Breeze should be tie down (6)
to the motor vehicle floor with a suitable restrain
belts and tight systems.
The Rear part of the Breeze should be tie down (7)
as at the 2 Yellow Marks at the rear part of the
Breeze-in the lower part of the power unit .
The tie/restrain system should be with similar
components and securing ,like the ones used in
standard cars fasten belt.
Transportation To reduce the height of the Breeze while
transporting it , The seat can be removed as
explained in chapter 3 : maintenance ,
And as well the Tiller can be folded to horizontal
position .
Figure 6
Shock
Absorbers
Adjust
It is possible to adjust the Shock Absorbers
according to the User Weight. Adjusting the shock
absorber can be done by a technician only
To Next Page
Loading...