EasyManua.ls Logo

Breg VPULSE - VPULSE Alerts

Breg VPULSE
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
of 22
Alerts
Flashing GREEN
• The Stop/Start button will flash
when the system is initializing.
To resolve:
• This may occur after power disruption or
after the system was improperly shut down.
Dynamic Compression VIOLET
and Sequential Compression RED
To resolve:
• The air pump is not achieving pressure,
contact Customer Care
Dynamic Compression and
Sequential Compression keys
Solid RED
To resolve:
• The SD card is not properly installed, the
card is full or faulty. Remove or reinstall
the card. If this condition persists contact
Customer Care.
• Cold Therapy is still active during this
condition.

Other manuals for Breg VPULSE

Related product manuals