Need help?Do you have a question about the BREIL OT10 and is the answer not in the manual?
Identifies the current hour on the watch dial.
Indicates the current minute on the watch dial.
Tracks continuous seconds or chronograph seconds.
Displays the 24-hour time, synchronized with hour/minute hands.
Measures seconds for chronograph up to 61s or acts as chronograph minute hand.
Measures hundredths of a second for chronograph up to 61s.
Controls chronograph start/stop and displays 1/100th second readings.
Resets the chronograph functions to zero.
Used for setting time, date, and pulling out to different positions.
Measures elapsed time in a single continuous interval.
Measures elapsed time by adding successive intervals.
Pull out the crown to position (2) to stop the second hand.
Turn the crown to set the minute, hour, and 24-hour hands.
Push the crown back to position (0) to resume watch movement.
Pull out the crown to position (1).
Rotate crown anticlockwise until the required date appears.
Push the crown back to position (0).
Pull the crown out to position (2) for adjustment.
Press button A to move the hundredths of a second hand to '0'.
Press button B to move the second hand of the chronograph to '0'.
Keep buttons A and B pressed to advance hands rapidly.
Reset time/date and move crown back to position '0'.
To Next Page
General
