42
Adjustment
Select UTC function, then pull crown out to position 2.
Press pushpiece B briefly: the H and MIN on the display flash in turn.
Their respective adjustments can be done by rotating the crown.
N.B. Minutes are corrected in 15-minute increments. Push crown back to
position 1.
43
10. Choice of audible confirmation signals
Four modes of audible signals may be programmed:
Select TON\L function. Lower display empty: no audible signal.
P appears in lower display: audible confirmation signal each time pushpieces
are pressed.
P-H appears in lower display: audible confirmation each time pushpieces are
pressed + hour pips.
To Next Page
Loading...
