Need help?Do you have a question about the BREMA CB 955 and is the answer not in the manual?
Details electrical connection via omnipolar circuit-breaker with residual current device.
Specifies installation in a hygienically clean, ventilated location, avoiding cellars and store-rooms.
Outlines requirements for connecting to water mains, including cold water supply and pressure.
Details electrical connection requirements, voltage matching, earthing, and socket specifications.
Lists prohibited uses and actions that could damage the appliance or cause contamination.
Instructions for washing internal parts before first use, emphasizing unplugging the appliance.
Steps for initial appliance start-up, including manual basin filling and connecting power.
Procedure for cleaning the water inlet solenoid valve filter every two months.
Recommends cleaning the finned condenser and external filter for air-cooled models.
General frequency and conditions for cleaning and sanitizing operations.
To Next Page
General
