What to do if Brent Farm Equipment tarp sags in middle areas?
If the tarp sags in the middle areas, the bows may be bent or adjusted too low. Also, check for a missing or loose ridge strap and replace or retighten it. The tension might be too loose, so the u-joint may need adjustment on the splined shaft to provide more tension.
General| Brand | brent |
|---|---|
| Model | 1082 |
| Category | Farm Equipment |
| Language | English |
Identifies hazard symbols and operator responsibility for accident prevention.
Safety measures for before, during, and after operation and servicing.
Critical safety measures for driveline and hydraulic systems.
Procedures for hitching, drawbar, jack, chains, and hydraulic/electrical connections.
Instructions for operating the PTO-driven auger system.
Procedures for lubricating the cart and maintaining the gearbox.
Disassembly, assembly, and replacement procedures for auger components.
Maintenance for PTO shaft length, clutches, and driveline components.
Components for the auger system, including augers, indicators, and cylinders.
Components for PTO shafts, clutches, and driveline assemblies.
To Next Page
