Brenthaven Exo User Manual

1
2
4
3
ASSEMBLY - EXO FOR CHROMEBOOKS
Top Case
Align the top device edge with the top
case edges where the angled material
starts. Using your fingers, slide the
case down, onto the device.
Bottom - Press in Keyboard
With the device in an upright position, press
the sides of the keyboard down into the case
until securely attached. Press the back corners
of the case to ensure it is securely attached.
Top Case - Back Spine
Close the device. Working from the left, push
the left corner of the case onto the device,
push the middle of the spine, and lastly, push
the right corner onto the device.
Bottom Case
Open the device, placing the bottom part of
the device at about a 45degree angle into
the bottom edge of the case.

Brenthaven Exo Specifications

General

Brand	Brenthaven
Model	Exo
Category	Laptop Accessories
Language	English

Summary

Assembly EXO for Chromebooks

Bottom Case Installation

Place the bottom part of the device at a 45-degree angle into the bottom edge of the case.

Top Case Attachment

Align the top device edge with the case edges and slide the case down onto the device.

Keyboard Securing

Press the keyboard sides and back corners into the case until securely attached.

Back Spine Locking

Push the left corner, middle spine, and right corner of the top case onto the device.

Removal EXO for Chromebooks

Top Case Back Spine Removal

Pull the back corners and back edge of the top case off the device.

Top Case Sliding Removal

Open the device and slide the top case off using the middle lifter tab.

Bottom Case Clip Release

Push the back corner and side clips of the bottom case off the device.