30
GETTING STARTED
• Insert 2 pcs. AA batteries in the weather station, and then 2 pcs. AAA batteries in the outdoor sensor.
• The weather station will automatically scan for the radio-controlled clock signal and the Meteotime
weather signal.
• The time and date signal will be received in a few minutes. Since there is a large amount of weather
information for all regions and days, the unit needs about 24 hours from the time of the initial setup
to complete the reception of all data
• After the time and date signal is being received successfully, it shows “SELECT COUNTY” and then „
“ as default city in the information window. To change the Country and the City please
see the information below.
• If the unit is able to receive the Meteotime signal successfully, this Meteotime icon will appear in
the second row of the display. Otherwise, the Meteotime icon will show .
means it successfully receives
today‘s weather information. Otherwise,
it will be
means it successfully receives
tomorrow‘s weather information.
Otherwise, it will be
means it successfully receives
weather information of one-day-after.
Otherwise, it will be
means it successfully receives
weather information of two-day-after.
Otherwise, it will be
means it is able to receive the
Meteotime weather signal. Otherwise,
it will be
Attention! For fi rst time operation
and battery replacement:
First insert batteries for main
unit and then insert batteries for
remote sensor.
To Next Page
Loading...
Need help?
General
