Bresser 4Cast PC - 2.0 Introduction

40
WIRELESS THERMO HYGRO
WIRELESS THERMO HYGRO
or
2.1 FEATURES OF WIRELESS IN/OUTDOOR MEASURING DEVICES
PRESSURE
• Current or historical pressure (mBar/ hPa, mmHg or inHg)
• Altitude or sea level pressure adjustment for atmospheric pressure compensation
• Pressure trend indication
• Sea-level pressure history for the last 24 days
• Sea-level pressure history bar chart
MOON PHASE
• 12 steps of moon symbols
• Scans moon phase for year 2000 to 2099
• Moon phase history for the last or future 39 days
REMOTE TEMPERATE AND RELATIVE HUMIDITY, WITH TREND INDICATION
• Indoor and outdoor temperature and relative humidity display (ºC or ºF)
• Temperature and relative humidity trend indication
• Dew point display
• Max and Min memory for temperature and relative humidity
COMFORT LEVEL INDICATOR
• Analyzes current environmental conditions (Comfort, Wet and Dry)
RAINFALL MEASUREMENT
• Records rainfall amount for the last hour, last 24 hours, last day, last week and last month
(inch or mm).
• Daily rainfall alert if rainfall for the current day exceed pre-specified amount.
WIND
• Temperature at place of anemometer.
• Temperature adjusted to wind chill factor. (ºC or ºF)
• Wind direction compass display. Wind direction angles available as compass points or
bearings.
• Average wind speed and gust speed (mph, m/s, knots, and km/h)
• Daily Maximum wind speed and gust speed memory.
• Wind speed alert for average wind speed and wind gust speed.
MEMORY FUNCTIONS
• Stores 200 weather records (without a computer connection) with memory saving intervals
(1 hr default).
• USB port for connection to computer to allow upload of weather records.
2.0 INTRODUCTION
MAIN UNIT
It measures indoor temperature and humidity, and displays weather data collected by the remote
weather sensors. It also provides indication of the indoor/outdoor temperature, pressure and
humidity trends, and moon phase.
The main console unit stores around 200 weather records without a computer connection. When
linked to a computer using the USB cable and software provided, the records from wireless
measuring devices can be displayed and saved onto the computer.
WIRELESS OUTDOOR MEASURING DEVICES
The remote weather sensors include a thermo-hygrometer, anemometer (wind sensor) and rain
sensor. All data collected by the sensors is transmitted to the main unit by wireless RF. The weather
station supports a maximum of 5 thermo-hygrometers, allowing 5 channels of temperature/humidity
display. Contents of the Wireless Outdoor Measuring Devices are listed as below.
Hardware Components
• Thermo-Hygro Sensor
Rain Sensor:
• Funnel shaped Lid with
Battery Hatch
• Sensor Base
• Bucket See-saw
Mechanism
• Protective Screen
Anemometer (Wind Sensor):
• Wind Cups
• Wind Vane
• Anemometer arm
• Anemometer base
Computer Software
Fittings
4 screws for
securing unit to
ground
4 screws for
securing unit to
vertical surface
2m (6ft) USB cable