ACTIVATING/DEACTIVATING WIND ALERTS
1. Each press of [ ALARM/CHART ] rotates wind speed display between:
• Current wind speed
• Wind speed alert (“ALARM HI” displayed)
• Gust alert (“GUST ALARM HI” displayed)
If the alert is deactivated, “OFF” will be shown, otherwise the alert value is shown.
2. When a wind alert is displayed, pressing [ ] or [ ] will activate/deactivate it.
SETTING UP THE WIND ALERTS
1. Press [ ALARM/CHART ] to select alarm which you wish to configure.
2. Press and hold [ ALARM/CHART ] until alert and corresponding icon starts flashing in the
display.
3. Set Value for Alert:
Press [ ] or [ ] to adjust value. Press and hold either button for fast advance.
Press [ ALARM/CHART ] to confirm your selection.
4. Upon completion the display will be returned to the wind alert selection screen.
DISABLING WHEN WIND ALERT IS ACTIVATED
To Disable Wind Alert:
Press [ ALARM/CHART ] to disable the alert.
3 LED BACKLIGHT OPTIONS
The backlight of the Main Unit can be turned permanently on/off or automatically toggled
when environment lighting level is low. Use the light sensor switch at the back of the unit to
select lighting preferences.
To Next Page
Loading...
