23
DE
EN
Quick Start
• Move the latches and open the front cover
• Load 8 lithium AA or alkaline AA batteries
• Insert the SD card
• Switch to the SETUP Mode
• Press MENU key
• Press UP key to select Camera or Video Mode
• Put it in the right position you would like
• Switch to the ON Mode and the camera has started
working
Notes Before Use
1. When setting camera parameters, please put camera
in Setup mode.
2. Do not set the camera directly from ON to Setup.
3. To replace the battery, SD card, fi rstly turn camera to
OFF mode.
4. The color changing of the Indicator
1) When camera is updating, indicator light fl ashes
green.
2) The indicator light fl ashes red when it is turned on
or ready for operation.
3) When battery is lower, the indicator light turns
blue.
4) When being set to long standby time, the indicator
fl ashes purple.
5. Batteries need to be used dry batteries, please do
not use rechargeable batteries
6. When the SD card is inserted into camera, make sure
that the SD card is not in the unprotected position
7. When using an external power supply, make sure that
the voltage is correct.
8. Please take out the battery for long time unused, to
avoid leakage of the battery.
9. This camera can be not used under water or can be
not placed in an environment of strong Acid and
alkali
10. Please do not touch the lenses with your fi ngers.
11. Keep the lens and battery compartment clean.
12. Do not use sharp or hard objects to attack or scratch
the screen.
Manual_3310007_Observation-camera-DL-30MP_de-en_BRESSER_v102020a.indb 23Manual_3310007_Observation-camera-DL-30MP_de-en_BRESSER_v102020a.indb 23 09.11.2020 14:17:5709.11.2020 14:17:57
To Next Page
Loading...
Need help?
General
