Breville Bench Mixer BEM800
Model:-BEM800
Total Version:-BEM800, BEM800/A, BEM800/B and BEM800/ C
Issue: - BEM800/C (latest version) Main power PCB is compatible after modification with BEM800,
Version A and Version B.
MODEL NO.
VERSION
PART NUMBERS HAVE TO CHANGE ALL BELOW PARTS AS ORIGINAL
INDIVIDUAL PARTS NLA
BEM800 MAIN PCB BEM800/700
• BEM800/700C
• BEM800/705C
• BEM800/706C (LED-SPEED PCB ASSY)
• Connect wires 3 & 4 together (as shown picture 1)
• Connect wires 1 & 2 to ON/OFF switch (Terminal 1 &
2 ) (as shown Picture 2) No connection at Terminal 3
LCD- TIMER PCB ASSY (15 pin)
LED- SPEED PCB ASSY (8 pin) NOT LISTED
BEM800/A MAIN PCB BEM800/700
• BEM800/700C
• BEM800/705C
• BEM800/706C (LED-SPEED PCB ASSY)
• Disconnect and discard wire 6, disconnect wire 5
from safety switch (as shown picture 3) and
reconnect to terminal B on main PCB, Connect wire
no 3 and 4 to safety switch (as shown picture 1)
• Connect wires 1 & 2 to ON/OFF switch (Terminal 1 &
2 ) (as shown Picture 2) No connection at Terminal 3
LCD- TIMER PCB ASSY (15 pin)
LED- SPEED PCB ASSY (8 pin) NOT LISTED
BEM800/B MAIN PCB BEM800/700B
• BEM800/700C
• BEM800/705C
• BEM800/706C (LED-SPEED PCB ASSY)
• Connect wire no 3 and 4 to safety switch (as shown
picture 1)
• Connect wires 1& 2 to ON/OFF switch (Terminal 1 &
2) (as shown Picture 2) No connection at Terminal 3
LCD- TIMER PCB ASSY (15 pin)
LED- SPEED PCB ASSY (8 pin) NOT LISTED
BEM800/C MAIN PCB BEM800/700C
• BEM800/700C (NORMAL REPLACEMENT)
LCD- TIMER PCB ASSY (13 pin)
LED- SPEED PCB ASSY (9 pin) BEM800/706C
To Next Page
Need help?
General
