17
OPERATING YOUR BREVILLE PRODUCT
5. Press the START/CANCEL button to
activate the ROAST function. The button
backlight will illuminate red, the oven
alert will sound and the LCD screen will
illuminate orange. The LCD screen will
indicate a blinking ‘PREHEATING’.
6. Once the oven has reached the set
temperature, the temperature alert
will sound.
7. Place food, positioned on the included
baking pan or other oven-proof dish, on
the center of the wire rack so air will flow
around all sides of the food.
8. After the PREHEATING alert has
sounded, the timer will automatically
begin to count down. The temperature
and time can be adjusted during
the roasting cycle by turning the
corresponding TEMPERATURE and
TIME dial. The cycle can be stopped
at any time by pressing the START/
CANCEL button.
PRESS
WHEN AT
TEMPERATURE
9. At the end of the ROAST cycle, the
oven alert will sound. The START/
CANCEL button backlight will go out
and the LCD screen will illuminate blue.
PIZZA FUNCTION
The PIZZA function melts and browns
cheese and toppings, while crisping up the
pizza crust.
1. Insert the wire rack, with the spokes
facing upward, into the middle rack
height position.
2. Close the oven door.
3. Turn the FUNCTION dial until the
indicator on the LCD screen reaches the
PIZZA function. The top figure on the
LCD screen indicates the preset PIZZA
temperature of ‘210°C’, while the bottom
figure indicates the preset time of
‘:20 MINS’. The preset CONVECTION
and FROZEN settings will also be
displayed.
4. The pizza temperature and time can be
adjusted before or during the cycle.
a) The pizza temperature is displayed as
the top figure on the LCD screen. Turn
the TEMPERATURE dial to adjust the
baking temperature from 50°C/120°F to
a maximum of 230°C/450°F.
b) The pizza time is displayed as the
bottom figure on the LCD screen.
Turn the TIME dial to adjust the time
up to 2 hours.
To Next Page
Loading...
Need help?
General
