Breville Brita - Identifying the Parts

4
1. Removeable drip tray
No mess, just lift it off the power base and rinse under the tap. Holds over 1 cup of
water before it needs emptying.
2. Removable stainless steel drip tray cover
3. Dispensing nozzle
4. Stop button
Press to immediately stop the boil sequence or to stop water that is being
dispensed.
5. Start button
Press to start the boil sequence.
6. Dispensing control
This control allows you to select the amount of water dispensed by your Hot Cup.
Move it towards for less water or for more water.
7. Lidapreleasebutton
Press to open the lid ap only and ll the water tank.
8. BRITA
®
Memo
Shows you when you need to change the BRITA
®
MAXTRA
®
water lter cartridge.
9. Removable lid
The complete lid can be lifted off your Hot Cup to access the lter and lter funnel.
10.Filterfunnelandltercartridge(insidewaterchamber)
11. Water chamber
12. Power base
13.BRITA
®
MAXTRA
®
waterltercartridge
Identifying the Parts