Need help?Do you have a question about the Brew Monk B40 and is the answer not in the manual?
Read instructions carefully, check for damage, voltage compatibility, avoid overloading, supervised locations.
Position on stable surface, keep children/animals away, ensure hygiene, clean equipment.
Connect curved pipe to circulation pipe, ensure seal, secure handles, pump must have water.
Attach bazooka filter to male thread inside Brew Monk using coupling piece and screwdriver.
Assemble malt pipe components including screens, handles, nut, and extendable overflow pipe.
Connect male thread connector to bottom malt screen, affix with nut, adjust extendable pipe height.
Insert overflow pipe into malt screen, extend pipe, insert into kettle, add malt, adjust pipe height.
Plug in, power on, connect to Wi-Fi for updates, navigate to main menu.
Rinse with water, clean components, close valves, add cleaning agent, run pump, dispose of water.
Connect to 'Brew Monk B..' network via mobile phone settings and follow pop-up instructions.
Access Menu > Settings > Software update on the kettle display and follow instructions.
Use the www.mybrewmonk.eu platform, sync recipes to kettle, or select directly from kettle menu.
Select Manual mode, adjust temperature, time, and wattage, then press Start.
Clean machine after each use, rinse with hot water, use soft cloth, store in dry place.
General| Brand | Brew Monk |
|---|---|
| Model | B40 |
| Category | Brewing Systems |
| Language | English |
To Next Page
