How to correct the Fahrenheit temperature on Brew Monk TITAN Brewing Systems?
To perform Fahrenheit temperature correction, press the “-” and “+” buttons simultaneously to enter the F1 temperature correction setting. The setting range is from -50°F to +50°F. Press the Temp button to confirm.
How to correct the degree centigrade temperature on Brew Monk Brewing Systems?
To perform degree centigrade temperature correction, press the “-” and “+” buttons at the same time to enter the C1 temperature correction setting, then press the Temp button to confirm. The setting range is from -10°C to +10°C.
What to do if ERR-2 is shown on Brew Monk TITAN display?
If ERR-2 is displayed, it indicates that the temperature is higher than 120°C, which is an overheat or boil-dry warning. This is due to sensor failure, so please contact your dealer for a replacement.
What to do if ERR-1 is shown on Brew Monk TITAN Brewing Systems display?
If ERR-1 is shown on the display, it means the temperature is lower than -20°C, indicating a low temperature warning. This can be caused by a loose sensor connector. You can open the underneath and check the sensor and reconnect it if it is loose.
What to do if my Brew Monk TITAN fails to reach 100°C?
If your system is failing to reach 100°C, try putting the cover on for 1 to 2 minutes. If that doesn't work, perform a temperature correction.
How to fix ingredients stuck in the pump of Brew Monk Brewing Systems?
If ingredients get stuck in the pump, you can flush the pump by connecting a hose to the curve pipe or dismantle the pump to remove the ingredients.
Important precautions for safe operation and reference.
Device placement, handling, and essential cleaning for brewing.
Instructions for pump operation and connecting circulation pipes.
Steps to assemble bazooka filter, overflow pipe, and malt screens.
Guide for filling malt pipe and performing initial machine rinse.
Overview of the control panel and its buttons for programming.
Setting parameters, modifying, saving, and recalling manual brewing.
Configuring, starting, and adjusting automatic brewing programmes.
Understanding step notifications and pausing/modifying programmes.
Saving, selecting, and editing pre-programmed recipes.
Detailed cleaning steps and pump maintenance instructions.
Guide for resolving common problems and error messages.
Key technical details of the Brew Monk Titan.
Schematic of the machine's electrical components.
General| Brand | Brew Monk |
|---|---|
| Model | TITAN |
| Category | Brewing Systems |
| Language | English |
To Next Page
