•
•
Tare Function
Calibration
Tare function is disabled under AUTO mode.
While in Manual modes: press the TARE button when needed.
•
Time Function
Mode 3, Time function can be paused; Mode 4, Time function
is disabled; Mode 5, manual time function is disabled.
1.When the scale is turned off, press and hold the ON/OFF button,
at the same time press the TARE button 4 consecutive times.
Release the ON/OFF button when you see the calibration setting
appear on the display.
2.After the display screen shows the message CO 100 add the
To Next Page
Loading...
