TROUBLE SHOOTING
If there is something wrong during operation, it may not be the unit’s problem. You may check against
the following list before send for repair.
1. The plug is not securely
inserted into the socket or not
connected well.
2. The “ON/OFF” button is not
pressed.
1. Insert the plug pin into the wall
socket and make sure it is connected
well.
2. Press “ON/OFF” button after
plugged.
1. Water tank not enough water
2. Water pump is obstructed.
1. Add water to ensure there is
enough water for pumping
2. Clean water tank discharge
impurities.
1. The filtration mesh is clogged
with dust and dirt, which affects
the unit’s performance.
2. The air vent is obstructed.
1. Clean the filtration mesh.
2. Remove the foreign objects from
the air vent.
NOTE:
THIS INSTRUCTIONAL CHART IS FOR REFERENCE PURPOSES ONLY, IF ANY TECHNICAL
ASSISTANCE IS NEEDED, PLAESE CALL STAR PROGETTI'S OFFICES FOR SERVICE/REPAIR AT
NO. 02/90639261 ext. 2
To Next Page
Loading...
