Brezza FRE80 - Product Specifications and Components; Accessories List; Technical Parameters; Operation Instructions

ACCESSORIES LIST
sequence
Accessory name
Quantity(pcs)
1
remote controller
1
2
instruction manual
1
3
caster with skid
2
4
caster without skid
2
TECHNICAL PARAMETERS
MODEL BREZZA
FRE80
Ratings
220-240 V / 50 Hz 450 W
MAX Air Flow Consumption
8000 m
3
/h
MAX Water Volume
80 l
Net Weight
20,52 kg
Measurements
679x440x1294 mm
MODEL UV BULB
E17-3W Mini UV bulb
Ratings
AC 10V 3W
Note: Due to constant development of our products in regards to specification and design,
we take reservation for changes without prior notice.
OPERATION INSTRUCTION
1. Pull the unit outwards from the carton and place it on a solid hot-proof horizontal surface.
2. Check if the accessories are complete, same as the accessories list.
3. Place the unit on a solid hot-proof horizontal surface. Take out the casters and caster wrench to
assemble.
Note: Casters with skid are for the two front holes and casters without skid are for the two
back holes at the bottom of the unit.(shown as fig.1)
4. Add water from the water inlet on the front cabinet.(shown as fig.2)
5