2022 Owner’s Manual Eagle 8 BRIG ltd
31
2.On the console switch panel (8) find switch of the (9) “SHOWER PUMP”. The backlight of the switch indicates the
activation of the selected mode “ON”.
NEVER ACTIVATE THE PUMP WHEN THERE IS NO WATER IN THE
WATER TANK. DAMAGE MAY OCCUR.
3.
Wait a few seconds for the pump to build up water pressure in the system. You can hear the characteristic pump
sound. The pump works in automatic mode. It will turn on periodically to maintain pressure in the system.
4.Open container with a shower (5). Take the shower handset and press the button on it. Water will flow as long as
you hold down the button.
5.
Put the shower handset back in the container after use.
6. On the console switch panel (8) turn off the switch (9) “SHOWER PUMP”.
When the switch is not lit, the water
pump is switched off.
.
SERVICING.
To inspect the system, open stern seat.
Inspect hoses and shower pump (3). Inspect the water tank and its fixing bracket (2). There should be no damage, cracks,
scuffs.
Wash (or replace) the filter (4) if necessary.
There should be no water leakage from the fresh water system. If the system is not tight, the pump will run continuously
trying to build up pressure.
Flush the system thoroughly periodically
with fresh water to avoid mold and odor.
Water on freezing can damage the fresh water system.
Water from the tank and hoses must be removed if there is a risk of freezing.
To Next Page
Loading...
