To Next PageTo Next PageWhat to do if my Brigade Measuring Instruments experience system power loss?
If your Brigade Measuring Instruments are experiencing system power loss, consider the following: The vehicle battery should be replaced if it is suspected of malfunctioning. Ensure the low voltage protection feature is turned on. Check if any fuses are blown and replace them if necessary.
Why am I experiencing video loss with my Brigade MDR 600?
If you're experiencing video loss with your Brigade Measuring Instruments, make sure cables are not installed in areas where they can be tampered with. Also, ensure cable connectors are secure before driving.
How to fix no recording on SD or HDD/SSD issue with Brigade MDR 600?
To fix a 'no recording' issue on your Brigade Measuring Instruments, ensure that the overwrite feature is turned on. Additionally, consider installing a larger capacity HDD/SSD or a 256GB SD card.
How to troubleshoot docking station failure in Brigade MDR 600 Measuring Instruments?
To troubleshoot docking station failure in your Brigade Measuring Instruments, ensure the MCU key is locked and that wires being used are protected by heat shrink.
What to do if Brigade MDR 600 fail due to environmental conditions?
If your Brigade Measuring Instruments fail due to environmental conditions, the driver should wait a few minutes for the internal heater to heat the HDD to above 10°C. The device will then start to record.
General| Brand | Brigade |
|---|---|
| Model | MDR 600 Series |
| Category | Measuring Instruments |
| Language | English |
Lists the key features and specifications of the MDR products.
Outlines the minimum and recommended hardware and software specifications for MDR Server 6.0.
Provides a step-by-step guide for installing the MDR Server software on a Windows Server.
Explains how to configure the MDR Server, including ports and IP addresses.
Guides users on how to access and manage MDR Server services and ensure they run as administrator.
Explains the trial period, renewal process, and authorization procedures for MDR Server.
Describes hardware communication methods, focusing on mobile network SIM cards.
Lists the minimum and recommended system requirements for MDR-Dashboard 6.0.
Provides a step-by-step guide for installing the MDR-Dashboard 6.0 software on client PCs.
Details how to configure Wi-Fi settings on the MDR unit itself.
Guides users on connecting MDR-Dashboard 6.0 to the MDR unit via Wi-Fi.
Explains how to log into MDR-Dashboard 6.0 using Wi-Fi server mode.
Describes the process of connecting an MDR unit to MDR-Dashboard 6.0 via Wi-Fi.
Explains how to configure mobile network settings on the MDR unit.
Guides users on connecting MDR-Dashboard 6.0 to the MDR unit via Mobile Network.
Explains how to log into MDR-Dashboard 6.0 using Mobile Network server mode.
Describes the process of connecting an MDR unit to MDR-Dashboard 6.0 via Mobile Network.
Displays the online/offline status of configured vehicles and allows viewing camera channels.
Explains the different operational modes: Live, Playback, and Evidence.
Details how to use the Live View feature, including real-time alarm logs and view options.
Explains how to access and use the Playback feature to review recorded video.
Describes how to playback recordings from HDD/SD cards and downloaded local files.
Guides on playing back downloaded recordings from USB drives or PC.
Explains how to access and playback recordings stored on the HDD/SD card via a calendar interface.
Details how to search for recordings based on geographic location and time.
Explains how to upload, manage, and view evidence files (clips, screenshots).
Guides on creating and uploading evidence packages, including video and snapshot files.
Describes how to access and view evidence stored on the server.
Explains how to view detailed evidence information and playback from evidence cards.
Displays server operator messages and notifications to end users.
Shows real-time vehicle status including online/offline, GPS position, speed, and alarms.
Details how to perform firmware and configuration upgrades for MDR units.
Provides statistics for fleet management, including alarms, GPS, mileage, and online rates.
Covers system management features like fleet, user, and role configuration.
The start-up page for System Management, showing fleet overview and navigation.
Used for configuring fleet details, adding vehicles, roles, and users.
Facilitates quick setup by adding fleets, vehicles, roles, and users together.
Allows viewing, adding, and editing fleets within the server.
Provides operations for adding and editing vehicle information.
Used for creating permission types and assigning roles to users.
Supports creating and managing driver information.
Provides a web-based live view of vehicle videos, similar to client software.
Offers web-based playback functionality for video recordings.
Links to the Evidence section for managing and viewing evidence files.
Links to the Fleet Statistics section for fleet management data.
Allows configuration of various settings via the web interface.
Configures map display options, including map type and address resolution.
Sets speed units for the web interface.
Configures the auto-close time for live view sessions.
Explains color coding used in the playback timeline.
Configures push notifications for mobile apps, requiring a push certificate.
Sets up email configuration for MDR-Dashboard alarm email features.
Configures how alarms are linked and trigger notifications.
Assigns importance levels to different alarm types.
Allows administrators to distribute messages to MDR-Dashboard clients.
Links to the Server Authorization section for managing licenses.
Manages downloads, auto-download schedules, and accesses the Alarm Center.
Explains how to set up local/server downloads and auto-download schedules.
Provides access to search alarms, configure alarm strategies, and manage alarm emails.
Used to search all alarms based on vehicle, time range, event type, and status.
Configures alarm notification settings, including lock map, audible alerts, and video channels.
Contains options for viewing data, including Map, Video, and Video/Map views.
Displays MDR GPS tracking data on a map, showing alarm triggers.
Allows viewing video channels only, with options to reorder channels.
Accesses both video and map data simultaneously for a comprehensive view.
Shows real-time alarms occurring on online MDRs, with options to process and dismiss them.
Manages user accounts, system settings, and checks for software updates.
Covers requirements, push certificate, and installation for the iOS application.
Lists the minimum hardware and software requirements for running the MDR 6.0 app on iOS devices.
Provides a step-by-step guide for installing the MDR 6.0 application from the Apple App Store.
Explains how to connect to MDR servers and operate the MDR 6.0 app on iOS devices.
Details requirements, installation, and operation of the MDR 6.0 Android application.
Lists the minimum hardware and software requirements for the MDR 6.0 app on Android devices.
Provides a step-by-step guide for installing the MDR 6.0 application from the Google Play Store.
Explains how to connect to MDR servers and operate the MDR 6.0 app on Android devices.
Details the process of backing up and restoring MDR Server databases to prevent data loss.
Guides users on creating database backups, including backup items and paths.
Explains the steps to restore MDR Server databases from backup files.
Used to check the status of MDR Server services and configure auto-run settings.
Displays logs of messages between MDR Server and connected clients.
A tool to monitor MDR/client connections and network speeds during live view.
Tool for managing licenses, currently for internal Brigade use.
Tool for transferring evidence from previous server versions to the new server.
Used to check disk health after expanding server storage with DAS or NAS.
Provides a table detailing video quality levels and corresponding data rates.
Warnings for reference values related to recording parameters.
Details compatibility between different firmware, client, and server versions.
Explains how to perform a silent installation of MDR-Dashboard 6.0 using PowerShell.
Lists and explains additional PowerShell switches for installation customization.
Provides solutions for common issues related to Wi-Fi and mobile network connectivity.
Addresses troubleshooting steps for various Wi-Fi status issues on MDR units.
Addresses troubleshooting steps for various mobile network status issues on MDR units.
Provides troubleshooting steps for GPS status issues, including antenna connection.
