Briggs & Stratton 040337-00 User Manual

Explains hazard symbols and signal words used in the manual.

Information for homeowners to understand installation options and communicate with contractors.

Discusses fuel types (LP/NG) and their impact on performance.

Safety rules for generator placement regarding exhaust and ventilation.

Lists items supplied with the generator and those that are not included.

Identifies major components like the Control Board, Circuit Breaker, and Air Cleaner.

Identifies fuel system components and oil level check points.

Details the generator's access panels and the components they cover.

Describes the buttons, digital display, USB port, and 15 Amp fuse.

Explains button icons and sequences for accessing programming modes.

Guides users through setting date, time, and exercise cycle.

Explains messages displayed in Automatic Mode and general system parameters.

Critical information regarding engine oil and the starting battery.

Details the automatic start/stop sequence based on utility voltage.

Steps to set or turn off the generator's automatic exercise cycle.

Pre-maintenance steps and procedures for the generator system.

Explanation of the system that monitors and reports fault conditions.

Procedure to clear detected service codes after resolving the issue.

Details on diagnosing and resolving codes like Low Battery, Low Oil Pressure, and Voltage issues.

Explains codes for High Oil Temp, Transfer Switch, and Battery Charge Circuit.

Lists tasks and intervals for routine generator maintenance.

Procedures for cleaning the generator and servicing its battery.

Explains the electronic governor and how to perform a diagnostic check.

Step-by-step guide for adjusting engine valve lash.

Procedures for changing engine oil and replacing the oil filter.

Instructions for verifying and topping up engine oil levels.

Detailed steps for draining oil and replacing the oil filter.

How to service the engine's air cleaner element.

Guidelines for inspecting fuel lines, regulators, and connections for leaks.

Checking the exhaust manifold and muffler for leaks.

Steps for cleaning, checking gap, and replacing spark plugs.

Details required information when contacting service or repair.

Solutions for issues like no AC output, engine bogging, and start failures.

Troubleshooting problems related to engine shutdown, exercise, vibration, and fuel odor.

Explains warranty coverage, owner responsibilities, and manufacturer obligations.

Covers specific parts, consequential coverage, and claim exclusions.

Defines warranty duration and what is covered for different usage types.

Lists conditions not covered, including wear, improper installation, and other exclusions.

Provides electrical specifications for 16kW and 20kW generator models.

Details engine displacement, bore, stroke, spark plug, and oil specifications.

Provides specifications for the 15kW model specific to California.