To Next PageTo Next Page
Need help?Do you have a question about the Briggs & Stratton 040661 and is the answer not in the manual?
Explains hazard symbols and signal words like DANGER, WARNING, CAUTION.
Lists safety symbols and their meanings, like read manual, fire.
Lists critical safety warnings related to operation, exhaust, battery, electrical hazards.
Provides safety steps for performing adjustments or repairs on the generator.
Details safety precautions for testing the engine spark.
Information regarding FCC rules compliance for digital devices.
Describes the generator system's compliance with emergency system definitions.
Lists duties and requirements for the generator installer.
Outlines responsibilities for the generator owner regarding operation and maintenance.
Discusses factors influencing generator installation location.
Instructions for inspecting the generator upon delivery for damage.
Lists items included with the generator system and items the owner needs.
Explains how location affects installation, safety, and compliance.
Details hazards of CO and how to prevent exposure.
Information on the necessity and function of CO detectors.
Identifies common entry points for CO gas into a structure.
Guidance on sealing and caulking the structure to prevent CO entry.
Safety measures to prevent fires related to the generator.
Specifies minimum clearances around the generator for fire prevention and maintenance.
Lists applicable codes and standards for generator installation.
Instructions and warnings for safely lifting and moving the generator.
Provides additional guidance for selecting a generator location.
Information on installing a cold weather kit for low-temperature operation.
Details on anchoring the generator to meet wind rating requirements.
Lists different types of anchors suitable for generator installation.
Specifies requirements for concrete slabs or pads based on wind rating.
Shows the location of fuel inlet and electrical connections.
Identifies generator access panels and the components behind them.
Instructions for planning and installing the fuel supply system.
Information on the fuel pressure regulator and its inspection.
Provides estimated fuel supply requirements for different loads and fuels.
Guidance on selecting and considering fuel types for generator operation.
Specifies required fuel pressures for natural gas and LP vapor.
Explains how altitude and temperature affect engine power.
Overview of the gaseous fuel system components and considerations.
Guidance on sizing fuel pipes according to industry standards.
Step-by-step instructions for converting the generator between fuel types.
Instructions and warnings for making electrical field connections.
Identifies the location of system connectors and provides a legend.
Information and warnings about engine oil before starting.
Safety warnings and requirements for installing the starting battery.
Information on the generator's system controller and its manual.
Identification of controls on the generator controller.
Overview of the generator's main controls and components.
Identifies key components visible from the front of the generator.
Identifies key components visible from the back of the generator.
Details on engine oil type and checking the oil level.
Information about the owner-supplied starting battery.
Safety warnings and procedures for servicing the generator system.
Explains how the generator controller manages automatic operation.
Describes the function of the utility voltage dropout sensor.
Describes the function of the utility voltage pickup sensor.
Explains the engine cool-down timer sequence.
Instructions for setting the automatic exercise timer on the controller.
Procedures and warnings for cleaning the generator's exterior.
General guidance on maintaining the generator, including cleaning.
Instructions for checking the engine oil level.
Step-by-step guide to accurately check the engine oil level.
Detailed steps for changing the engine oil and oil filter.
Procedure for checking and adjusting valve lash on the engine.
Explanation of the electronic governor system and its benefits.
Procedure for checking the generator's electronic governing system.
Instructions for inspecting, cleaning, and replacing spark plugs.
Steps for inspecting, cleaning, and replacing the engine air cleaner.
Guidance on inspecting the exhaust system for leaks and condition.
Instructions for inspecting the fuel system for leaks and proper function.
Information on inspecting the fuel pressure regulator.
Checks for the mixer and throttle body components.
Explains the generator's alarm system and how it indicates issues.
Procedure for acknowledging and resetting generator alarms.
Checks for the generator's electrical system connections and wiring.
Safety precautions and steps for servicing the battery.
Detailed instructions for safely replacing the starting battery.
Steps for charging the generator's battery if necessary.
Table of common problems, causes, and corrections for generator operation.
Technical specifications for the generator, including amperage, voltage, and weight.
Technical specifications for the generator's engine, including bore, stroke, and gap.
Explains hazard symbols and signal words like DANGER, WARNING, CAUTION.
Lists safety symbols and their meanings, like read manual, fire.
Lists critical safety warnings related to operation, exhaust, battery, electrical hazards.
Provides safety steps for performing adjustments or repairs on the generator.
Details safety precautions for testing the engine spark.
Information regarding FCC rules compliance for digital devices.
Describes the generator system's compliance with emergency system definitions.
Lists duties and requirements for the generator installer.
Outlines responsibilities for the generator owner regarding operation and maintenance.
Discusses factors influencing generator installation location.
Instructions for inspecting the generator upon delivery for damage.
Lists items included with the generator system and items the owner needs.
Explains how location affects installation, safety, and compliance.
Details hazards of CO and how to prevent exposure.
Information on the necessity and function of CO detectors.
Identifies common entry points for CO gas into a structure.
Guidance on sealing and caulking the structure to prevent CO entry.
Safety measures to prevent fires related to the generator.
Specifies minimum clearances around the generator for fire prevention and maintenance.
Lists applicable codes and standards for generator installation.
Instructions and warnings for safely lifting and moving the generator.
Provides additional guidance for selecting a generator location.
Information on installing a cold weather kit for low-temperature operation.
Details on anchoring the generator to meet wind rating requirements.
Lists different types of anchors suitable for generator installation.
Specifies requirements for concrete slabs or pads based on wind rating.
Shows the location of fuel inlet and electrical connections.
Identifies generator access panels and the components behind them.
Instructions for planning and installing the fuel supply system.
Information on the fuel pressure regulator and its inspection.
Provides estimated fuel supply requirements for different loads and fuels.
Guidance on selecting and considering fuel types for generator operation.
Specifies required fuel pressures for natural gas and LP vapor.
Explains how altitude and temperature affect engine power.
Overview of the gaseous fuel system components and considerations.
Guidance on sizing fuel pipes according to industry standards.
Step-by-step instructions for converting the generator between fuel types.
Instructions and warnings for making electrical field connections.
Identifies the location of system connectors and provides a legend.
Information and warnings about engine oil before starting.
Safety warnings and requirements for installing the starting battery.
Information on the generator's system controller and its manual.
Identification of controls on the generator controller.
Overview of the generator's main controls and components.
Identifies key components visible from the front of the generator.
Identifies key components visible from the back of the generator.
Details on engine oil type and checking the oil level.
Information about the owner-supplied starting battery.
Safety warnings and procedures for servicing the generator system.
Explains how the generator controller manages automatic operation.
Describes the function of the utility voltage dropout sensor.
Describes the function of the utility voltage pickup sensor.
Explains the engine cool-down timer sequence.
Instructions for setting the automatic exercise timer on the controller.
Procedures and warnings for cleaning the generator's exterior.
General guidance on maintaining the generator, including cleaning.
Instructions for checking the engine oil level.
Step-by-step guide to accurately check the engine oil level.
Detailed steps for changing the engine oil and oil filter.
Procedure for checking and adjusting valve lash on the engine.
Explanation of the electronic governor system and its benefits.
Procedure for checking the generator's electronic governing system.
Instructions for inspecting, cleaning, and replacing spark plugs.
Steps for inspecting, cleaning, and replacing the engine air cleaner.
Guidance on inspecting the exhaust system for leaks and condition.
Instructions for inspecting the fuel system for leaks and proper function.
Information on inspecting the fuel pressure regulator.
Checks for the mixer and throttle body components.
Explains the generator's alarm system and how it indicates issues.
Procedure for acknowledging and resetting generator alarms.
Checks for the generator's electrical system connections and wiring.
Safety precautions and steps for servicing the battery.
Detailed instructions for safely replacing the starting battery.
Steps for charging the generator's battery if necessary.
Table of common problems, causes, and corrections for generator operation.
Technical specifications for the generator, including amperage, voltage, and weight.
Technical specifications for the generator's engine, including bore, stroke, and gap.
General| Brand | Briggs & Stratton |
|---|---|
| Model | 040661 |
| Category | Portable Generator |
| Language | English |
