Need help?Do you have a question about the Briggs & Stratton 040351 and is the answer not in the manual?
General| Brand | Briggs & Stratton |
|---|---|
| Model | 040351 |
| Category | Portable Generator |
| Language | English |
Explains hazard symbols like DANGER, WARNING, CAUTION, and NOTICE.
Warns about CO gas from engine exhaust and necessary precautions.
Covers California chemical warnings and battery hazards like explosive gas and acid.
Addresses hazards from high voltage, flammable gases, and improper fuel handling.
Covers risks from rotating parts, entanglement, and unintentional sparking.
Details risks from exhaust heat, high operating speeds, and improper generator handling.
Guidance for homeowners to communicate with contractors and understand installation.
Information for professionals regarding installation and contact details.
Familiarizes owners with installation options, factors, and local codes.
Discusses fuel types (natural gas, LP) and their impact on performance.
Provides guidelines for safe and proper generator placement and clearances.
Instructions for inspecting the generator upon delivery for any damage.
Identifies key components and their functions for the 8kW model.
Identifies key components and their functions for the 10kW model.
Details the location and purpose of various access panels on the generator.
Provides instructions on how to remove and secure the roof and front access panels.
Explains the functions of buttons, display, and fuses on the control panel.
Details button functions and key sequences for accessing programming modes.
Guides users through setting date, time, and exercise cycle via the control panel.
Explains display messages in Automatic Mode and how to navigate general system parameters.
Key notes for owners regarding engine oil and battery installation.
Information about engine oil type and importance of proper servicing before starting.
Requirements for the starting battery and charging procedures.
Explains the critical role of the 15 Amp fuse for system operation.
Instructions on how to set or turn off the generator's weekly exercise cycle.
Step-by-step procedure for safely preparing the generator for maintenance.
Explains how the system detects and displays fault codes.
Details various service codes and their potential causes and remedies.
Lists recommended maintenance tasks at various intervals (hours/calendar).
Covers general cleaning, safety precautions during maintenance, and how to clean the generator.
Notes on maintenance, replacement, or repair of emissions control devices.
Step-by-step guide for servicing or replacing the generator's battery.
Instructions on how to properly charge the generator's battery.
Details how to check and adjust valve clearance for engine models.
Explains how to check the oil level and add oil if necessary.
Step-by-step instructions for changing the engine oil and oil filter.
Procedures for cleaning or replacing the engine's air cleaner element.
Covers inspection and maintenance of natural gas/propane fuel systems.
Instructions on how to inspect, gap, and replace spark plugs for better engine performance.
Advises on cleaning cooling fins and air inlets for proper generator operation.
Lists information needed when contacting service or repair centers.
Recommendations for taking the system out of service for extended periods.
A table listing common problems, their causes, and suggested corrections.
Explains EPA emissions standards and B&S warranty coverage for engines.
Details what the warranty covers for emission-related components and damaged parts.
Outlines owner's duties for maintaining the unit and filing warranty claims.
Defines what constitutes an emergency stationary engine for warranty purposes.
Specifies warranty periods for parts, labor, and travel in different regions.
Explains warranty terms for enclosure, accessory parts, and registration.
Lists common reasons why warranty claims may be denied.
Details specific types of equipment or usage that are excluded from warranty.
Provides technical details for 10kW and 8kW generator models.
Lists technical data for engine displacement, bore, stroke, gaps, and oil.
To Next Page