What to do if my Briggs & Stratton Engine is overheating?
If your Briggs & Stratton Engine is overheating due to restricted airflow, it might be because dirt or debris is blocking the air intake. Clear the air intake grille using a brush or dry cloth.
General| Max Torque | 8.5 ft-lbs |
|---|---|
| Fuel Type | Gasoline |
| Carburetor | Float Feed |
| Governor System | Mechanical |
| Starter Type | Recoil |
| Shaft Orientation | Vertical |
| Horsepower | 6.25 hp |
| Oil Capacity | 20 oz |
| Ignition System | Magnetron Electronic Ignition |
| Spark Plug | RJ19LM |
| Air Cleaner | Foam |
| Engine Type | 4-stroke, single cylinder, OHV (Overhead Valve) |
| Shaft Size | 0.875 inches (22.2 mm) |
Explains safety alert symbols and signal words (DANGER, WARNING, CAUTION, NOTICE) used to denote hazard severity.
Lists and defines various hazard symbols indicating potential personal injury or equipment damage.
Provides important safety warnings regarding chemicals, engine use, and fuel hazards.
Step-by-step instructions for starting the engine based on its specific starting system.
Detailed steps for safely draining old oil and adding new engine oil.
Offers advice for diagnosing and resolving common engine problems.
To Next Page