What to do if my Briggs & Stratton Engine is overheating?
If your Briggs & Stratton Engine is overheating due to restricted airflow, it might be because dirt or debris is blocking the air intake. Clear the air intake grille using a brush or dry cloth.
General| Displacement (cc) | 163 |
|---|---|
| Fuel Type | Gasoline |
| Oil Capacity (oz) | 20 |
| Starting System | Recoil |
| Max Torque (ft-lbs) | 7.25 |
| Fuel Tank Capacity (gal) | 0.26 |
| Spark Plug Gap (in) | 0.030 |
| Oil Type | SAE 30 |
| Ignition System | Electronic |
| Engine Type | 4-stroke, OHV, single cylinder |
Explains signal words like DANGER, WARNING, CAUTION used with safety alerts.
Lists symbols for hazards like fire, shock, hot surface, and their meanings.
Contains important warnings about chemicals, engine exhaust, improper engine application, and oil.
Step-by-step instructions for starting an engine with the ReadyStart system.
Step-by-step instructions for starting an engine with a primer system.
Outlines recommended maintenance tasks at different hour intervals.
Detailed steps for draining and refilling engine oil, including safety precautions.
Instructions for servicing foam and paper air filters, including cleaning and replacement.
To Next Page