To Next PageTo Next Page
Need help?Do you have a question about the Briggs & Stratton 290000 and is the answer not in the manual?
General| Oil Capacity | 20 oz (0.6 L) |
|---|---|
| Carburetor | Float Feed |
| Governor Type | Mechanical |
| Engine Type | 4-Cycle OHV |
| Rotation | Counterclockwise (from PTO side) |
Identifies and labels the various parts of the engine using a figure.
Provides essential safety instructions and warnings before operating the engine.
Explains the meaning of hazard symbols used throughout the manual for safety.
Defines international symbols used for safety alerts and operational controls.
Details the procedure for checking the engine's oil level using the dipstick.
Provides instructions on how to check the fuel level before refueling.
Outlines steps to take before starting the engine, including fuel shut-off and choke.
Explains the correct procedure for starting the engine using a rewind starter.
Details the process for starting the engine using an electric starter system.
Describes how to adjust the choke control for proper engine operation.
Explains the procedure for adjusting the throttle control linkage.
Provides guidance on carburetor adjustments, recommending professional service.
Details the regular checking, changing, and filter replacement for engine oil.
Specifies when and how to perform an oil change for the engine.
Provides instructions for replacing the oil filter, including proper installation.
Explains how to diagnose and address issues related to engine oil pressure.
Describes the maintenance procedure for the dual-element air cleaner system.
Covers the inspection, cleaning, and replacement of spark plugs.
Provides guidance on keeping the engine clean to prevent overheating and damage.
Specifies the warranty duration for engines used in personal residential households.
Details the warranty duration for engines used for commercial or rental purposes.
Lists issues not covered by warranty, specifically related to using non-original parts.
Explains emission control system warranty requirements for specific regions.
Outlines the owner's responsibilities for maintaining the engine and understanding warranty coverage.
Lists the specific parts covered under the emission control system warranty.
Specifies the duration of the warranty coverage for warranted parts.
Details that repairs for warranted parts will be performed at no cost to the owner.
Outlines conditions under which warranty claims may be excluded.
Explains that warranty coverage depends on proper maintenance as defined in the manual.
Covers engine component failures caused by a failure of a warranted part.
