To Next PageTo Next PageWhat to do if my Briggs & Stratton 30204 Portable Generator has no AC output?
If your Briggs & Stratton Portable Generator is running but not producing AC output, you can try the following: * Reset the circuit breaker. * Connect another device that is known to be in good condition. If these steps don't work, the generator might need to be checked and repaired or you may need to contact an authorized service facility.
General| Model | 30204 |
|---|---|
| Starting System | Recoil |
| Fuel Type | Gasoline |
| Runtime at 50% Load | 9 hours |
| Wheels | No |
| Fuel Gauge | Yes |
| Low Oil Shutdown | Yes |
| Circuit Breaker | Yes |
| Type | Portable |
| Weight | 118 lbs |
| Engine | Briggs & Stratton OHV |
| Voltage | 120V |
Clarifies DANGER, WARNING, CAUTION, and the safety alert symbol usage.
Warns about CO poisoning and electrical risks like backfeed.
Details fuel hazards, fire prevention, and starter cord kickback.
Emphasizes checking and filling engine oil for proper operation.
Details using clean, unleaded fuel and avoiding overfilling.
Stresses using a qualified electrician for safe connection to home wiring.
Advises on outdoor operation, ventilation, and clearance distances.
Instructions on level surface, fuel valve, and pull-cord starting.
Explains how to calculate running and surge watts for connected items.
