How to get help with my Briggs & Stratton 400000 Engine?
If you require assistance with your Briggs & Stratton Engine, you can contact your local dealer, visit BRIGGSandSTRATTON.COM, or call 1-800-444-7774 (in USA).
How to prevent fuel leakage when replacing fuel filter in Briggs & Stratton 400000 Engine?
To prevent fuel leakage during fuel filter replacement in your Briggs & Stratton Engine, drain the fuel tank or close the fuel shut-off valve.
Why does my Briggs & Stratton 400000 Engine overheat?
Your Briggs & Stratton Engine may overheat due to several reasons. Accumulated debris can restrict airflow, causing the engine to overheat. To resolve this, use a brush or dry cloth to remove debris from the air intake grille. Also debris can accumulate in the cylinder cooling fins and cause the engine to overheat. Have a Briggs & Stratton Authorized Service Dealer inspect and clean the air cooling system as recommended in the Maintenance Schedule. Make sure the oil cooler fins are free of dirt and debris. Keep linkage, springs and controls clean. Keep the area around and behind the muffler free of any combustible debris.
General| Governor Type | Mechanical |
|---|---|
| Air Cleaner | Dual Element |
| Fuel Shut-Off | Yes |
| Low Oil Shutdown | Yes |
| Fuel Tank Capacity | 3.8 L (1.0 gal) |
| Spark Plug | Champion |
| Starter Type | Recoil |
| Carburetor | Float Feed |
To Next Page